Optimizing the Image 4-9
4.3.2
4.3.3
Edge Enhance
Description The range of “Edge Enhance” is 0~4. 0 represents no Edge Enhance and 4
represents maximum Edge Enhance.
Operations Press <Menu> to open M Img Menu, and move cursor to [Edge Enhance (value)].
Press <Set> to increase the Edge Enhance and press <Back> to decrease the
Edge Enhance.
The value is displayed in the menu.
Effects /
Impacts The adjustment to Edge Enhance will influence the cine review.
Operation
Conflicts
The Edge Enhance cannot be adjusted when the image is frozen.
M Soften
Description Adds up the scanning lines of M-mode image and calculate the average value in
order to remove the noise on the image and make the image details clearer. Its
range is 0~15.
Operations Press <Menu> to open the M Img Menu, and move cursor to [M LineCorre
(0~15)]. Then press <Set> to increase the value or press <Back> to decrease the
value.
Effects Removes noises in the image.
Impacts The adjustment to M LineCorre will influence the cine review.
Operation
Conflicts
M LineCorre cannot be adjusted when the image is frozen.
To Next Page
Loading...
Need help?
General
