Print Parameter
Item
Copies
Drop-down
list/Text box
Select or input the copies of files to be printed.
Film Size Drop-down list
8INX10IN, 8_5INX10IN, 10IN×12IN, 10IN×14IN,
11INX14IN, 11INX17IN, 14INX14IN, 14INX17IN, 24cm×
24cm, 24cm×30cm, A4, A3
Medium Type Drop-down list Paper, Clear Film, Blue Film
Trim Drop-down list Yes, No
Settings Drop-down list RGB, Gray
Min Density Text box Input a number representing minimum density.
Max Density Text box Input a number representing maximum density.
Priority Drop-down list High, Medium, Low
Film Orientation Drop-down list LANDSCAPE, PROCESSOR
Film Destination Drop-down list MAGAZINE/ PROCESSOR
Display Format Drop-down list
STANDARD\1,1; STANDARD\2,2; STANDARD\2,3;
STANDARD\3,3; STANDARD\3,4; STANDARD\3,5;
STANDARD\4,3; STANDARD\4,4; STANDARD\4,5;
STANDARD\5,6;
Magnification
Type
Drop-down list
Input type of magnification: REPLICATE/ BILINEAR/
CUBIC/ NONE
Configuration Info Text box Specified image quality control information of printers.
OK Button Save and exit.
Cancel Button Cancel and exit.
8.8 Manage Settings
Export
1. Select the items to be exported and click [Export].
2. Select the path.
3. Click [OK] to export or click [Cancel] to cancel.
Import
z [Restore Factory]: Select a category and click [Restore Factory] to reset it.
z Import
1. Select the items to be imported and click [Import].
2. Select the path and the preset data to be imported (*.DTA).
3. Click [OK] to import or click [Cancel] to cancel.
8-16 Preset
To Next Page
Loading...
Need help?
General
