Low Reservoir reminder setup:
1. Go to the Low Reservoir screen.
Menu > Reminders > Low Reservoir
2. Select Type to set the reminder using either Units or Time.
3. Depending on the type you selected, do one of the following:
• Select Units to enter the number of units. You can set a value from
5 units to 50 units.
• Select Time to enter the number of hours you want to use for your
reminder. You can enter from 2 to 24 hours.
4. Select Save.
Set Change reminder
The Set Change reminder helps you remember to change your infusion set. After
you turn on this reminder, it automatically tracks the time between infusion set
changes and reminds you to change your infusion set.
To turn on or off, or change the Set Change reminder:
1. Go to the Set Change screen.
Menu > Reminders > Set Change
2. Select Reminder to turn the reminder on or off. If you turn on the reminder,
select Time and choose two or three days for the reminder.
3. Select Save.
Calibration reminders
The Calibration reminder is available if you are using the Sensor feature. This
feature helps you remember to calibrate your sensor. For example, if you set your
reminder to four hours, you receive a Calibrate By alert four hours before the next
BG meter reading is due.
To turn on or off, or change the Calibration reminder:
1. Go to the Calibration screen.
Menu > Reminders > Calibration
■
reminders
Reminders 133
MP6025957-024 / A
RELEASED
To Next Page
Loading...
