MiniMed 640G - Disconnecting the Transmitter from the Sensor; Removing the Sensor; Turning off Sensor Settings

Disconnecting the transmitter from the sensor
Always refer to your transmitter user guide for instructions on disconnecting the
transmitter from the sensor.
Removing the sensor
Always refer to the sensor user guide for instructions on how to remove the
sensor.
Turning off Sensor Settings
You can turn off Sensor Settings at any time. If you disconnect the transmitter
from the sensor, turn off the Sensor Settings to avoid getting a sensor alert. Your
sensor settings remain in your pump. You cannot make changes to the settings
until you turn on the Sensor Settings again.
To turn off Sensor Settings:
1. Go to the Sensor Settings screen.
Menu > Sensor Settings
2. Select Sensor.
3. Select Yes to turn off the sensor feature.
188 Chapter 10
MP6025957-024 / A
RELEASED