To change your Bolus Wizard BG target range:
1. Go to the BG Target screen.
Menu > Insulin Settings > Bolus Wizard Setup > BG Target
2. Select Edit.
3. Select the BG target to adjust the Start time, the End time, and the Lo (low)
and Hi (high) BG Target values. Your high value cannot be less than your low
value. You can set up to eight different values using different time segments.
The time segments must cover a 24-hour period.
If your BG target is outside the typical range of 5.0 to 7.8 mmol/L, a message
appears asking you to confirm your setting.
4. When you have made your changes, select Save.
Changing your Active Insulin Time
The active insulin time setting lets the pump know which active insulin time to
use in calculating the amount of active insulin to subtract before estimating a
bolus. Your healthcare professional will prescribe the active insulin time that is best
for you.
To change your active insulin time:
1. Go to the Active Insulin Time screen.
Menu > Insulin Settings > Bolus Wizard Setup > Active Insulin Time
2. Select Duration, then adjust your active insulin time (in hours), using 15-
minute increments.
3. Select Save.
Turning off the Bolus Wizard feature
You can turn off the Bolus Wizard feature at any time. Your Bolus Wizard settings
remain in your pump. When the Bolus Wizard is turned off, the Bolus Wizard
option does not appear in the Bolus Menu, and you cannot edit your Carb Ratio,
Insulin Sensitivity Factor, or BG Target settings from the Bolus Wizard Setup screen.
To turn off the Bolus Wizard feature:
1. Go to the Bolus Wizard Setup screen.
Menu > Insulin Settings > Bolus Wizard Setup
■
bolus
Bolus 71
MP6025957-024 / A
RELEASED
To Next Page
Loading...
