Setting up Continuous Glucose
Monitoring
This chapter explains how to wirelessly connect your pump and transmitter, and
how to enter your sensor settings and set up continuous glucose monitoring
(CGM) on your pump. You will need the following:
• MiniMed 640G insulin pump
• Sensor glucose settings (provided by your healthcare professional)
• Enlite sensor
• Guardian 2 Link transmitter kit
WARNING: Do not make therapy treatment decisions based on
sensor glucose values because sensor glucose and blood glucose
values may differ. If your sensor glucose reading is low or high, or if
you feel symptoms of low or high glucose, confirm your blood
glucose with your BG meter prior to making therapy decisions to
avoid severe low or high glucose conditions.
Understanding Continuous Glucose Monitoring (CGM)
The Sensor feature on the pump lets you integrate and use continuous glucose
monitoring (CGM). CGM is a sensor glucose monitoring tool that uses a glucose
sensor that is placed below your skin to continuously measure the amount of
glucose in your interstitial fluid. CGM helps you better manage your diabetes by:
• Recording your glucose values throughout the day and night
Setting up Continuous Glucose Monitoring 151
■
setting up continuous glucose monitoring
MP6025957-024 / A
RELEASED
To Next Page
Loading...
