Menu > Utilities > Sensor Demo
2. Select Alert Demo.
3. To see and hear sensor-related alerts, select any of the listed alerts.
4. To exit an alert example, press
, then select OK to clear the alert. To exit
Sensor Demo, press .
Time and date
Make sure the time and date are always set correctly on your pump. This is
necessary to ensure the correct basal insulin delivery and to keep an accurate
record of pump functions. You may need to change the time or the date if you
travel to a different time zone or practice daylight saving time. After the time and
date are changed, the pump adjusts all settings automatically.
To change the time and the date:
1. Go to the Time & Date screen.
Menu > Utilities > Time & Date
2. Select and change the Time, Time Format, or Date as necessary. If you are
using a 12-hour clock, be sure to specify AM or PM.
3. Select Save.
148 Chapter 9
MP6025957-024 / A
RELEASED
To Next Page
Loading...
