Title and text Explanation Next steps
SG value not available
If problem continues, see
User Guide.
The sensor signals
are either too high
or too low.
• Select OK to clear the alert.
• You do not need to change the
sensor. If the alert persists, test
your transmitter with the tester.
Refer to your transmitter user
guide for instructions on testing
the transmitter.
Sensor warm-up started
Warm-up takes up to 2
hours. You will be notified
when calibration is
needed.
Your sensor is
warming up.
• Select OK to clear the message.
• For more information, see
Starting the sensor, on page 182.
Suspend before low
Delivery stopped. Sensor
glucose approaching Low
Limit. Check BG.
Your SG value is
falling. Insulin
delivery is
suspended
according to your
Suspend before low
setting and your SG
is approaching your
specified low limit.
• Select OK to clear the alert.
• Check your BG. If necessary, treat
your BG as directed by your
healthcare professional.
Suspend on low
Delivery stopped. Sensor
glucose XX.X mmol/L.
Check BG.
Your SG value is at
or below the low
limit you specified.
• Select OK to clear the alert.
• Check your BG. If necessary, treat
your BG as directed by your
healthcare professional.
Transmitter battery
depleted
Recharge transmitter now.
The battery in the
transmitter needs to
be recharged. SG
values are not
recorded or
transmitted until
you recharge
transmitter.
• Select OK to clear the alert.
• Recharge your transmitter.
■
alarms, alerts, and messages
Alarms, alerts, and messages 225
MP6025957-024 / A
RELEASED
To Next Page
Loading...
