Mitel 6915 - Page 64

Customizing your phone
3. Use the up and down navigation keys to scroll through and highlight the desired audio mode. Valid
values are:
• Speaker (default)
• Headset
• Speaker/Headset
• Headset/Speaker
4. Press the Save softkey to save your changes.
Headset
The Headset option allows you to:
• set the volume level for the headset microphone (if supported)
• enable or disable DHSG.
• enable USB Wireless mode when a USB Wireless headset is connected to the phone
Configuring Headset Mic Volume, DHSG and USB Wireless Using the IP Phone UI
1.
Press on the phone to enter the Options List.
2. Navigate to the Audio > Headset option and press the select button or Select softkey.
3. With Headset Mic Vol highlighted press the right navigation key to move to selection column.
4. Use the up and down navigation keys to scroll through and choose the desired volume setting. Valid
values are:
• Low
• Medium (default)
• High
5. Press the left navigation key to move to back to the options column and press the down navigation key
to highlight DHSG.
Version 1.0
User Guide 58