A -
12
Print Date
Manual Number Revision
Apr., 2013 IB(NA)-0300135-F [Additional function]
Operation control program (Others (RTO, RFROM))
[Additional correction/partial correction]
About Manuals, Restrictions by the software's version, [Rq.324]
Connection command of synchronous encoder via device/master CPU
(M11602+4n), [Md.412] Execute cam axis length per cycle
(D13622+30n, D13623+30n), [Pr.422] Cam axis length per cycle
change setting (D115059+150n), Operation control program
(Synchronous control dedicated function (CAMMK)), Error code list,
Processing times
Nov., 2013 IB(NA)-0300135-G [Additional correction/partial correction]
Safety precautions, Restrictions by the software's version, Motion
error history device error information
Dec., 2015 IB(NA)-0300135-H [Additional correction/partial correction]
Restrictions by the software's version, Structure of the Motion CPU
program, Operation control programs (Synchronous control dedicated
function(CAMRD, CAMWR)), Servo status7 (#8018+20n), Motion
error history device error information, Motion SFC error code list,
Warranty
Mar., 2017 IB(NA)-0300135-J [Additional correction/partial correction]
Safety precautions, Restrictions by the software's version, Internal
operation data types of operation control programs, Task and interrupt
processing, Motion SFC error code list, Warranty
Dec., 2019 IB(NA)-0300135-K [Additional correction/partial correction]
Miscellaneous text corrections
Japanese Manual Number IB(NA)-0300127
This manual confers no industrial property rights or any rights of
any other kind, nor does it confer any patent
licenses. Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property
rights which may occur as a result of using the contents noted in this manual.
© 2007 MITSUBISHI ELECTRIC CORPORATION
To Next Page
Loading...
