4 - 9
4 MOTION SFC PROGRAMS
4.4 Motion SFC Program Name
Set the "Motion SFC program name" to the Motion SFC program No.0 to No.255
individually.
Set the Motion SFC program name within 16 characters. Specify this Motion SFC
program name for a "subroutine call/start step (GSUB)" and "clear step (CLR)".
Refer to "Chapter 11 USER FILES" for the user file of the Motion SFC program.
POINT
(1) It is can be set the Motion SFC program to any of No.0 to No.255. There are
no specific programs which have special roles.
(2) "$" cannot be used in the first character of the Motion SFC program name.
(3) "\ / : ; , . * ? " < > |" cannot be used in Motion SFC program name.
To Next Page
Loading...
