APP - 56
APPENDICES
10) Set "Data Type" for the added data.
Select "Integer", "Unsigned Integer" or "Floating Point".
The data type stored in the Motion CPU device is always a 64-bit floating
point type regardless of the data type set here.
11) Click [OK] button to close the FormatString dialog.
<Screen: In-Sight Explorer>
R
11)
10)
12) Check the "TCP/IP Settings".
Leave the Server Host Name blank. (The vision system acts as the TCP/IP
server.)
The port number must be the same as the port No. for TCP/IP
communication set with the Ethernet communication line setting. (Refer to
(1) in this section.)
<Screen: In-Sight Explorer>
R
12)
To Next Page
Loading...
