Mitsubishi Electric RD77MS2 - Page 550

548
12 DATA USED FOR POSITIONING CONTROL
12.9 Memory Configuration and Data Process
Parameter area (b)
Positioning data area
(No.1 to 600)
Servo parameter area
PLC CPU memo area
Monitor data area
Control data area
Buffer memory/Internal memory
Block start data area
(No.7000 to 7004)
Parameter area (a)
Parameter area (c)
(7) Flash ROM write request
(7) Flash ROM write request
(7) Flash ROM write request
Parameter area (a)
Servo amplifier
Engineering tool
(6) Flash ROM write
(Set "1" in [Cd.1] with TO command)
[Pr.1] to [Pr.7]
[Pr.11] to [Pr.24]
[Pr.43] to [Pr.57]
[Pr.81] to [Pr.83]
CPU module
[Pr.89] to [Pr.95], [Pr.100]
Flash ROM
Parameter area (b)
Positioning data area
(No.1 to 600)
Block start data area
(No.7000 to 7004)
Parameter area (a)
Parameter area (c)
Servo parameter area
(6) Flash ROM write
Internal memory
(nonvolatile)
[Pr.8] to [Pr.10]
[Pr.25] to [Pr.42]
Parameter area (b)
Parameter area (c)
[Pr.96], [Pr.97], [Pr.100]
[Pr.116] to [Pr.119]
[Pr.84]
[Pr.150] to [Pr.153]
[Pr.116] to [Pr.119]
[Pr.122], [Pr.123]
[Pr.150], [Pr.151], [Pr.153]
[Pr.800] to [Pr.807]
Simple Motion module