Mitsubishi L2E Service Manual

72 / 155
Service Manual Mitsubishi L-Series diesel engines
Version 08/2004
ENGLISH
PISTON AND CONNECTION ROD ENGINE MAIN PARTS
5. Apply engine oil to the bearing surface of the
connecting rod caps. Fit each cap to the
connecting rod using match marks placed before
removal as a guide. In the case of a new rod which
does not have such a match mark, position the
lugs (provided for preventing the bearing from
rotating) on the same side.
Figure 76 Fitting cap to connecting rod

Mitsubishi L2E Specifications

General

Engine Model	L2E
Number of Cylinders	2
Starting System	Electric starter
Lubrication System	Forced lubrication by trochoid pump
Cooling System	Water-cooled