Function mode
[14]-4
(7) Completing combination data creation
* Creation of the combination data is completed.
* Press to return.
* Normal stitching can be executed after returning
to the Standard screen. The stitching data will
automatically change in the combined order.
* Reading/deleting combinations
(1) Combination screen display
* Press on the Combination screen
(2) Selected screen display
* Select the combination data to be read in. (Select
the read destination (internal memory/floppy disk)
in the same manner as normal stitching data
read.)
* If is pressed here, the selected
combination
data will be deleted.
Memo
When reading from the floppy disk, The sign of
"KMI" besides "Pattern name" is used. It is meant
that this is the combination data and is added by the automatic operation.
(3) Completing combination data read
* Press to return.
* Normal stitching can be executed after returning
to the Standard screen. The stitching data will
automatically change in the combined order.
To Next Page
Loading...
Need help?
General
