Mobotix T26 - T26 Components: Outside; Terminal boards; Modules; Frame

16
T26 System Manual Part 1
T26 Components: Outside
Terminal boards
ETH Module: Securely connects the camera module with the
mounted 8 wires of the network patch cable via RJ45 connector.
Only for T26 versions without Mx2wire+.
MX-OPT-IO2
IO Module: The board provides an additional 8 signal inputs and
3 signal outputs to connect external devices (doorbell, light, etc.).
MX-OPT-IO1
Modules
T26-CamCore: Fisheye lens (for 360 ° panorama view) and inte-
grated live image correction, high-resolution 6 megapixel color
sensor, speaker, microphone and MicroSD data storage for approx.
250 one-minute video clips or 60,000 VGA images.
MX-T26M-
Sec-D12
Cindy Jones
Thomas Jones
Dr. Jones, MD
KeypadRFID/BellRFID access module: Keyless and scheduled
access using key codes (KeypadRFID) or an RFID transponder card.
Interchangeable bell buttons with high-quality labels (BellRFID). The
voice mailbox can also be operated via the access module.
MX-Keypad1-EXT
MX-Bell1-Core
Info Module: Provides the option to display the house number
and/or name to the door station. The module is equipped with
permanent backlighting using energy-saving and long-lasting LED
technology.
MX-Info1-EXT
Info Module Mx2wire+: The info module with Mx2wire+ technology
and a second Mx2wire+ unit for mounting inside the building oers
users not only the standard info module functions but also the
option to connect and supply power to the door station via existing
two-wire cabling instead of a network cable.
MX-2wirePlus-Info1-EXT
Frame
Single frame: 131 x 143 x 18 mm (W x H x D).
Integrated electromagnetic the protection.
Includes special key for module unlocking, housing gasket and
installation material.
MX-OPT-
Frame-1-EXT
Double frame: 131 x 233 x 18 mm (W x H x D).
Integrated electromagnetic the protection.
Includes special key for module unlocking, housing gasket and
installation material.
MX-OPT-Frame-
2-EXT
Triple frame: 131 x 333 x 18 mm (W x H x D).
Integrated electromagnetic the protection.
Includes special key for module unlocking, housing gasket and
installation material.
MX-OPT-Frame-3-EXT
The camera module is also
available with a particularly
light-sensitive B/W sensor
(MX-T26M-SecNight-N12)
The indoor unit is
always part of the
Info Module Mx2wire+
One admin and several user
RFID cards are included
with an access module
(KeypadRFID/BellRFID)