Mobotix T26 - Default Chapter; Table of Contents

3
Table of Contents
SYSTEM MANUAL PART 1 – SYSTEM OVERVIEW AND INSTALLATION
This T26 System Manual Part 1, «System Overview and Installation» is supplemented by the T26
System Manual Part 2, «Initial Operation and Conguration»
. If you no longer have a manual at
your disposal, you can download a PDF le from the MOBOTIX website (www.mobotix.com >
Support > Download Center > Documentation > Manuals).
TABLE OF CONTENTS
Legal Notes 6
Safety Warnings 7
Foreword 8
Overview of the System Components 22
1 System Overview 24
1.1 Outdoor Station 24
1.1.1 Hemispheric Camera T26-CamCore 24
1.1.2 ETH Module (Ethernet Terminal Board) 26
1.1.3 Access Module KeypadRFID 28
1.1.4 Access Module BellRFID 30
1.1.5 Info Module 32
1.1.6 Info Module Mx2wire+ (With Mx2wire+ Indoor Unit) 34
1.1.7 Housing and Module Frames 38
1.2 MX-DoorMaster 44
1.3 Remote Stations 46
1.3.1 MxDisplay+ 46
1.3.2 MOBOTIX MxBell 48
1.3.3 MxManagementCenter 49
1.4 Accessories 50
1.4.1 NPA-PoE Set 50
1.4.2 IO Module (Extended Terminal Board) 51
1.4.3 MX-Overvoltage-Protection-Box 51
1.4.4 MX-GPS-Box 52
1.4.5 Additional Devices for PoE Power Supply 52
1.4.6 Additional Video Remote Stations 53
1.4.7 Door Sensors 53
1.4.8 Electrical Door Opener 53
2 Installation 54
2.1 Overview: Connection and Wiring Diagrams 54
2.1.1 With MX-DoorMaster 54
2.1.2 Without MX-DoorMaster 56
2.1.3 With Info Module Mx2wire+ and MX-DoorMaster 58