Commit/Reboot
Whenever you use the web console to change system settings, the changes are
initially placed in temporary storage. To save your changes for future use, you can
use the Commit/Reboot function. This function saves your changes from RAM to
ash memory and reboot the system.
IMPORTANT! Do not turn off your modem or press the Reset button while this
procedure is in progress.
Commit/Reboot
From the left-hand • Adminmenu, click on Commit/Reboot. The following page
is displayed:
Commit/Rebootpage
Click on • OK.
The System is Restarting ...•
To Next Page
Loading...