From the Encryption drop-down list, select WPA,WPA2 or WPA2Mixedsetting.
Click on the ratio of Enterprise(RADIUS).
Enter the Port, IPAddress and Password of RADIUS Server:
10.0.0.1001812
Change setting successfully! Click on OK button to conrm and return.
Access Control
For security reason, using MAC ACL’s (MAC Address Access List) creates another
level of difculty to hacking a network. A MAC ACL is created and distributed to AP so
that only authorized NIC’s can connect to the network. While MAC address spoong
is a proven means to hacking a network this can be used in conjunction with addi-
tional security measures to increase the level of complexity of the network security
decreasing the chance of a breach.
MAC addresses can be add/delete/edit from the ACL list depending on the MAC
Access Policy.
If you choose ‘Allowed Listed’, only those clients whose wireless MAC addresses
are in the access control list will be able to connect to your Access Point. When ‘Deny
Listed’ is selected, these wireless clients on the list will not be able to connect the
Access Point. To access the WirelessNetworkAccessControlpage:
From the left-hand Wirelessmenu, click on AccessControl. The following page is
displayed:
To Next Page
Loading...
Need help?
General