ATM Settings
The page is for ATM PVC QoS parameters setting. The DSL device support 4 •
QoS mode —CBR/rt-VBR/nrt-VBR/UBR.
From the left-hand • WANmenu, click on ChannelCong. The following page
is displayed:
Field Description
VPI Virtual Path Identier. This is read-only eld and is selected on
the Select column in the Current ATM VC Table.
VCI Virtual Channel Identier. This is read-only eld and is se-
lected on the Select column in the Current ATM VC Table. The
VCI, together with VPI, is used to identify the next destination
of a cell as it passes through to the ATM switch.
To Next Page
Loading...
Need help?
General