7. Your conguration is complete.
8. Now you are ready to Surf the Internet !!!
Conguring your PPPoA DSL connection
If your ISP’s Internet service uses PPPoA you need to set up a PPP login account.
The rst time that you login to the Internet, your ISP will ask you to enter a username
and password so they can check that you are a legitimate, registered Internet service
user. Your device stores these authentication details, so you will not have to enter this
username and password every time you login.
Your ISP may also tell you to set unique path and circuit numbers (called VPI and
VCI) in order to connect your device to the ISP’s Internet service. In most cases, your
device will use default settings, so you may not need to enter these values.
Note
Your ISP will provide you with the login details and VPI/VCI values necessary to
set up a PPP login account.
If your ISP wants you to connect to the Internet using PPP, follow the instructions
below.
From the left-hand • WANmenu, click on ChannelCong. The following page
is displayed:
Enter VCI and VPI setting determined by your ISP.•
Select the Encapsulation determined by your ISP.•
From the • ChannelMode drop-down list, select PPPoE setting.
Enter • UserName/Password provided by your ISP. Type them in the relevant
boxes.
If you are happy with your settings, click • Add
To Next Page
Loading...
Need help?
General