Password
You can restrict access to your device’s web pages using password protection.
With password protection enabled, users must enter a username and password be-
fore gaining access to the web pages.
By default, password protection is enabled on your device, and the username and
password set are as follows:
Username: admin
Password: administrator
Username: user
Password: user
Setting your username and password
Note
Non-authorized users may try to access your system by guessing your user-
name and password. We recommend that you change the default username
and password to your own unique settings.
To change the default password:
From the left-hand Admin menu, click on Password. The following page is dis-
played:
Currently Dened Administration Password: Setup page
This page displays the current username and password settings. Change your
own unique password in the relevant boxes. They can be any combination of letters
or numbers with a maximum of 30 characters. The default setting uses admin for the
username and administrator for password.
If you are happy with these settings, click Apply Changes. You will see following
page that the new user has been displayed on the Currently Dened Users. You need
to login to the web pages using your new username and new password.
To Next Page
Loading...
Need help?
General