Operations of AP - AP being a registrar
AP mode
Whenever users enter station’s PIN into AP’s Wi-Fi Protected Setup page and click
“Start PIN”, AP will become a registrar. Users must start the PIN method on the sta-
tion side within two minutes.
1. From the left-hand Wireless->WPS menu. The following page is displayed:
2. Make sure AP is in un-congured state.
3. Enter the Client PIN Number.
4. Click Start PIN.
5. Users must start the PIN method on the station side within two minutes.
6. Users must start the PIN method on the station side within two minutes.
To Next Page
Loading...
Need help?
General