Now you can load your PPPoE Client Software onto your PC.•
Now you can load your PPPoE Client Software with • username and password
which determined by your ISP onto your PC.
Conguring your 1483 MER by DHCP
From the left-hand • WANmenu, click on ChannelCong. The following page
is displayed:
Enter VCI and VPI setting determined by your ISP.•
Select the Encapsulation determined by your ISP.•
From the • ChannelMode drop-down list, select 1483MER setting.
From the • Type ratio, click DHCP.
If you are happy with your settings, click • Add
Your conguration is complete.•
Now you are ready to Surf the Internet !!!•
To Next Page
Loading...