There are two different DHCP roles that this device can act as: DHCP Serve and
DHCP Relay. When acting as DHCP server, you can setup the server parameters at
the DHCP Server page; while acting as DHCP Relay, you can setup the relay at the
DHCP Relay page.
DHCP Server Conguration
From the left-hand • Services menu, click on DHCPSettings.
From • Services check ratio, click on DHCPServerMode.
Type a new IP Pool Range, Subnet Mask, Max Lease Time, Domain Name •
and Gateway Address.
Click on • ApplyChanges.
10.0.0.2
10.0.0.2
10.0.0.64 10.0.0.254
Field Description
IP Pool Range Specify the lowest and highest addresses in the pool.
Max Lease Time The Lease Time is the amount of time that a network user is
allowed to maintain a network connection to the device using
the current dynamic IP address. At the end of the Lease Time,
the lease is either renewed or a new IP is issued by the DHCP
server. The amount of time is in units of seconds. The default
value is 86400 seconds (1 day). The value –1 stands for the
innite lease.
Domain Name A user-friendly name that refers to the group of hosts (subnet)
that will be assigned addresses from this pool.
Function Button Description
Show Client This shows the assigned IP address, MAC address and time
expired for each DHCP leased client.
To Next Page
Loading...
Need help?
General