EasyManuals Logo

Modecom MC-4220 User Manual

Modecom MC-4220
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
802.11n WLAN ADSL2+ Router
Introduction
Congratulations on becoming the owner of the Wireless ADSL2+ Router. You will
now be able to access the Internet using your high-speed DSL connection.
This User Guide will show you how to connect your Wireless ADSL2+ Router, and
how to customize its conguration to get the most out of your new product.
Features
The list below contains the main features of the device and may be useful to us-
ers with knowledge of networking protocols. If you are not an experienced user, the
chapters throughout this guide will provide you with enough information to get the
most out of your device.
Features include:
Internal DSL modem for high-speed Internet access
10/100Base-T Ethernet Router to provide Internet connectivity to all comput-
ers on your LAN
Network address translation (NAT) functions to provide security for your LAN
Network conguration through DHCP Server and DHCP Client
Services including IP route and DNS conguration, RIP, and IP and DSL per-
formance monitoring
User-friendly conguration program accessed via a web browser
User-friendly conguration program accessed via EasySetup program
Device Requirements
In order to use the Wireless ADSL2+ Router, you must have the following:
DSL service up and running on your telephone line
Instructions from your ISP on what type of Internet access you will be using,
and the addresses needed to set up access
One or more computers each containing an Ethernet card (10Base-T/100Base-
T network interface card (NIC))
For system conguration using the supplied a. web-based program: a web
browser such as Internet Explorer v4 or later, or Netscape v4 or later. Note
that version 4 of each browser is the minimum version requirement – for opti-
mum display quality, use Internet Explorer v5, or Netscape v6.1 b. EasySetup
program: Graphical User Interface
Note
You do not need to use a hub or switch in order to connect more than one
Ethernet PC to your device. Instead, you can connect up to four Ethernet PCs
directly to your device using the ports labeled Ethernet on the rear panel.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Modecom MC-4220 and is the answer not in the manual?

Modecom MC-4220 Specifications

General IconGeneral
BrandModecom
ModelMC-4220
CategoryNetwork Router
LanguageEnglish