Modecom MC-4220 - DHCP Server Configuration - Set DNS Manually

71
802.11n WLAN ADSL2+ Router
DHCP Server Conguration - Set DNS Manually
From the left-hand • Services menu, click on DNS->DNSServer.
From check ratio, click on • AttainSetDNSManually.
Enter the IP Address of DNS.•
Click on • ApplyChanges.
Field Description
Attain DNS
Automatically
Select this item if you want to use the DNS servers obtained by
the WAN interface via the auto-conguration mechanism.
Set DNS
Manually
Select this item to congure up to three DNS IP addresses.
Function Button Description
Apply Changes Set new DNS relay conguration. New parameters will take effect
after save into ash memory and reboot the system. See section
“Admin” for save details.
Reset Selected Discard your changes.
Change setting successfully! Click • OK button.