Modecom MC-4220 - DHCP Relay Configuration

65
802.11n WLAN ADSL2+ Router
DHCP Relay Conguration
From the left-hand • Services menu, click on DHCPSettings.
From • Services check ratio, click on DHCPRelayMode.
Type DHCP server IP Addresses for DHCP Relay.•
Click on • ApplyChanges.
Field Description
DHCP Server
Address
Specify the IP address of your ISP’s DHCP server. Requests
for IP information from your LAN will be passed to the default
gateway, which should route the request appropriately.
Function Button Description
Apply Changes Set new DHCP server conguration. New parameters will take
effect after save into ash memory and reboot the system. See
section “Admin” for save details.