Incoming Default Action Specify the default action on the WAN to LAN bridging/
forwarding path.
Function Button Description
Apply Changes Click to change the setting of default actions to the conguration.
Fields on the second
setting block
Description
Rule Action Deny or allow trafc when matching this rule.
Direction Trafc bridging/forwarding direction.
Source MAC Address The source MAC address. It must be xxxxxxxxxxxx
format. Blanks can be used in the MAC address space
and are considered as don’t care.
Destination MAC Address The destination MAC address. It must be
xxxxxxxxxxxx format. Blanks can be used in the MAC
address space and are considered as don’t care.
Function Button Description
Delete Selected Delete selected ltering rules from the lter table. You can click the
checkbox at the Select column to select the ltering rule.
Delete All Delete all ltering rules from the lter table.
From the left-hand • Adminmenu, click on Commit/Reboot. The following page
is displayed:
Click on • OK.
The System is Restarting ...•
To Next Page
Loading...