Fieldsontherstsetting
block
Description
Enable DMZ Check this item to enable the DMZ feature.
DMZ Host IP Address IP address of the local host. This feature sets a local
host to be exposed to the Internet.
Function Button Description
Apply Changes Click to change the setting to the conguration.
From the • DMZHost check ratio, check on Enable
Type the IP Address in the • DMZHostIPAddress eld.
Click • ApplyChanges
10.0.0.33
Congure DMZ Host setting successfully! Click • OK.
From the left-hand • Adminmenu, click on Commit/Reboot. The following page
is displayed:
Click on • OK.
To Next Page
Loading...
Need help?
General