Modecom MC-4220 - Page 98

www.modecom.eu
98
802.11n WLAN ADSL2+ Router
Fieldsontherstsetting
block
Description
UPnP Daemon Enable/disable UPnP feature.
Binded WAN Interface Select WAN interface that will use UPnP from the drop-
down lists.
Function Button Description
Apply Changes Click to save the setting to the conguration.
From the • UPnP check ratio, check on Enable
Select a WAN Interface from the • WANInterface drop-down list.
Click • ApplyChanges
Congure DMZ Host setting successfully! Click • OK.
From the left-hand • Adminmenu, click on Commit/Reboot. The following page
is displayed:
Click on • OK.