About This Guide
Introduction
The Symbol LS3408 Product Reference Guide provides general instructions for setting up, operating, maintaining,
and troubleshooting the scanner. The Symbol LS3408 includes the following variations of the scanner:
•
LS3408-FZ20005: 1-D scanning
•
LS3408-ER20005: extended range 1-D scanning.
Chapter Descriptions
•
Chapter 1, Getting Started provides a product overview and unpacking instructions.
•
Chapter 2, Scanning describes parts of the scanner, beeper and LED definitions, and how to use the scanner
in hand-held and hands-free modes.
•
Chapter 3, Maintenance and Technical Specifications provides information on how to care for the scanner,
troubleshooting, and technical specifications.
•
Chapter 4, User Preferences provides the programming bar codes necessary for selecting user preference
features for the scanner.
•
Chapter 5, Keyboard Wedge Interface provides information for setting up the scanner for Keyboard Wedge
operation.
•
Chapter 6, RS-232 Interface provides information for setting up the scanner for RS-232 operation.
•
Chapter 7, USB Interface provides information for setting up the scanner for USB operation.
•
Chapter 8, IBM 468X/469X Interface provides all information for setting up the scanner with IBM 468X/469X
POS systems.
•
Chapter 9, Wand Emulation Interface provides all information for setting up the scanner for Wand Emulation
operation.
•
Chapter 10, Scanner Emulation Interface provides information for setting up the scanner for Scanner
Emulation operation.
To Next Page
Loading...
Need help?
General
