Motorola Symbol LS3408 Product Reference Guide

12 - 40 Symbol LS3408 Product Reference Guide
MSI
Enable/Disable MSI
To enable or disable MSI, scan the appropriate bar code below.
Enable MSI
*Disable MSI
Set Lengths for MSI
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Lengths for MSI may be set for any length, one or two discrete lengths, or lengths within a
specific range.
One Discrete Length - This option allows the scanner to decode only those MSI symbols containing a selected
length. Lengths are selected from the numeric bar codes beginning on page D-1 in Appendix D, Numeric Bar
Codes. For example, to decode only MSI symbols with 14 characters, scan MSI - One Discrete Length, then scan
1 followed by 4. In case of an error, or to change the selection, scan Cancel on page D-3.
MSI - One Discrete Length

Motorola Symbol LS3408 Specifications

General

Brand	Motorola
Model	Symbol LS3408
Category	Scanner
Language	English