Advanced Data Formatting 14 - 19
Message Containing A Specific Data String
Use this feature to select whether the formatting affects data that begins with a specific character or data string, or
contains a specific character or data string.
There are 4 features:
•
Specific String at Start
•
Specific String, Any Location
•
Any Message OK
•
Rule Belongs to Set
Specific String at Start
Scan this bar code, then scan the bar codes representing the desired character or characters (up to a total of 8) in
the Alphanumeric Keyboard on page 14-99.
After scanning the following bar code:
1. Enter a string using the Alphanumeric Keyboard on page 14-99.
2. Scan End of Message on page 14-110.
Specific String At Start
Specific String, Any Location
Scan this bar code, then, using the Numeric Keypad on page 14-20, scan a two-digit number representing the
position (use a leading “zero” if necessary). Then scan the desired character or characters (up to a total of 8) on
the Alphanumeric Keyboard on page 14-99, followed by the End of Message bar code on page 14-110.
After scanning the following bar code:
1. Enter a location using the Numeric Keypad on page 14-20.
2. Enter a string using the Alphanumeric Keyboard on page 14-99.
3. Scan End of Message bar code on page 14-110.
Specific String Any Location
Any Message OK
By not scanning any bar code, all selected code types are formatted, regardless of information contained.
To Next Page
Loading...
Need help?
General
