Miscellaneous Scanner Options 13 - 5
Scan Data Transmission Format
To change the Scan Data Transmission Format, scan the Scan Options bar code below. Then select one of four
options:
•
Data As Is
•
<DATA> <SUFFIX>
•
<PREFIX> <DATA>
•
<PREFIX> <DATA> <SUFFIX>
When a selection is made, scan the Enter bar code on page 13-6. In case of a mistake, scan the Data Format
Cancel bar code on page 13-6.
To program a carriage return/enter after each bar code scanned, scan the following bar codes in order:
1. <SCAN OPTIONS>
2. <DATA> <SUFFIX>
3. Enter (on page 13-6)
Scan Options
*Data As Is
<DATA> <SUFFIX>
To Next Page
Loading...
