Motorola Symbol LS3408 Product Reference Guide

13 - 8 Symbol LS3408 Product Reference Guide
Synapse Interface
The auto-detection of a Synapse cable needs to vary in duration depending on the type of Synapse connection. If a
scanner is connected to another scanner using a Synapse cable then the Auxiliary Synapse Port connection
should be used. In all other cases, where the cable is used, the default setting is recommended.
Should the user want to disconnect and reconnect the scanner from a Synapse cable that is connected to a live
host via a Synapse, then the "Plug and Play" setting should be used. This setting should not be changed from the
default if an on-board wedge host is enabled.
*Standard Synapse Connection
Auxiliary Synapse Port Connection
“Plug and Play” Synapse Connection

Motorola Symbol LS3408 Specifications

General

Brand	Motorola
Model	Symbol LS3408
Category	Scanner
Language	English