Chapter 5 Keyboard Wedge Interface
Introduction
This chapter provides Keyboard Wedge interface information for setting up the scanner. This interface type is used
to attach the scanner between the keyboard and host computer. The scanner translates the bar code data into
keystrokes. The host computer accepts the keystrokes as if they originate from the keyboard.
This mode of operation allows adding bar code reading functionality to a system designed for manual keyboard
input. In this mode the keyboard keystrokes are simply passed through.
Throughout the programming bar code menus, default values are indicated with asterisks (
*).
*North American
Feature/Option
* Indicates Default
To Next Page
Loading...
