Motorola Symbol LS3408 Product Reference Guide

Miscellaneous Scanner Options 13 - 7
FN1 Substitution Values
The Wedge and USB HID Keyboard hosts support a FN1 Substitution feature. When enabled any FN1 character
(0x1b) in an EAN128 bar code is substituted with a value. This value defaults to 7013 (Enter Key)
1. To select a FN1 Substitution Value, scan the bar code below.
Set FN1 Substitution Value
2. Look up the keystroke desired for FN1 Substitution in the ASCII Character Set table for the currently installed
host interface. Enter the 4-digit "ASCII Value" by scanning each digit in Numeric Bar Codes on page D-1.
3. To correct an error or change the selection, scan CANCEL.
To enable FN1 Substitution for Wedge, scan the Enable Keyboard Wedge FN1 Substitution bar code on page
5-10.
To enable FN1 Substitution for USB HID Keyboard, scan the Enable USB Keyboard FN1 Substitution bar code on
page 7-9.
Transmit “No Read” Message
Scan a bar code below to select whether or not a “No Read” message is transmitted. When enabled, the
characters NR are transmitted when a bar code is not decoded. When disabled, if a symbol does not decode,
nothing is sent to the host.
Enable No Read
*Disable No Read

Motorola Symbol LS3408 Specifications

General

Brand	Motorola
Model	Symbol LS3408
Category	Scanner
Language	English