Motorola Symbol LS3408 Product Reference Guide

6 - 18 Symbol LS3408 Product Reference Guide
Nixdorf Mode A/B and OPOS/JPOS Beep/LED Options
When Nixdorf Mode A, Nixdorf Mode B or OPOS/JPOS is selected, this parameter indicates when the scanner
should beep and turn on its LED after a decode.
*Normal Operation
(Beep/LED Immediately After Decode)
Beep/LED After Transmission
Beep/LED After CTS Pulse
Ignore Unknown Characters
Unknown characters are characters the host does not recognize. When Send Bar Codes with Unknown Characters
is selected, all bar code data is send except for unknown characters, and no error beeps sound on the scanner.
When Do Not Send Bar Codes With Unknown Characters is selected, bar code data is sent up to the first unknown
character and then an error beep sounds on the scanner.
*Send Bar Code
(with unknown characters)
Do Not Send Bar Codes
(with unknown characters)
NOTE The Beep/LED After CTS Pulse option is not valid when Nixdorf Mode A is selected.

Motorola Symbol LS3408 Specifications

General

Brand	Motorola
Model	Symbol LS3408
Category	Scanner
Language	English