Motorola Symbol LS3408 - Function Key Mapping; FN1 Substitution; Send Make and Break

5 - 10 Symbol LS3408 Product Reference Guide
Function Key Mapping
ASCII values under 32 are normally sent as control key sequences (see Table 5-2 on page 5-13). When this
parameter is enabled, the keys in bold are sent in place of the standard key mapping. Table entries that do not
have a bold entry remain the same whether or not this parameter is enabled.
Enable Function Key Mapping
*Disable Function Key Mapping
FN1 Substitution
When enabled, this parameter allows replacement of any FN1 characters in an EAN128 bar code with a keystroke
chosen by the user. (see FN1 Substitution Values on page 13-7).
Enable FN1 Substitution
*Disable FN1 Substitution
Send Make and Break
When enabled, the scan codes for releasing a key are not sent.
*Send Make and Break Scan Codes
Send Make Scan Code Only