12 - 38 Symbol LS3408 Product Reference Guide
Set Lengths for Codabar (continued)
Length Within Range - This option allows the scanner to decode a Codabar symbol with a specific length
range. The length range is selected from numeric bar codes beginning on page D-1 in Appendix D, Numeric
Bar Codes. For example, to decode Codabar symbols containing between 4 and 12 characters, first scan
Codabar - Length Within Range. Then scan 0, 4, 1, and 2 (single digit numbers must always be preceded by a
leading zero). In case of an error, or to change the selection, scan Cancel on page D-3.
Codabar - Length Within Range
Any Length - This option allows the scanner to decode Codabar symbols containing any number of characters
within the scanner capability.
Codabar - Any Length
To Next Page
Loading...
