Motorola TC55 Integrator Guide

Installing Applications Using the USB Connection
Caution:
When connecting the device to a host computer and mounting its microSD card, follow the host computer’s
instructions for connecting and disconnecting USB devices, to avoid damaging or corrupting files.
Procedure:
1 Connect the device to a host computer using USB. See USB Communication on page 45.
2 On the host computer, copy the application .apk file from the host computer to the device.
3 Disconnect the device from the host computer. See USB Communication on page 45
4
On the device, touch .
5
Touch to view files on a microSD card or Internal Storage.
6 Locate the application .apk file.
7 Touch the application file to begin the installation process.
8 To confirm installation and accept what the application affects, touch Install. otherwise touch Cancel.
Figure 69: Accept Installation Screen
9 Touch Open to open the application or Close to exit the installation process. The application appears in the App
list.
Installing Applications Using the Android Debug Bridge
Use ADB commands to install application onto the device.
Caution:
When connecting the device to a host computer and mounting its microSD card, follow the host computer’s
instructions for connecting and disconnecting USB devices, to avoid damaging or corrupting files.
Prerequisites: Ensure that the ADB drivers are installed on the host computer. See ADB USB Setup on page 111.
Procedure:
1 Connect the device to a host computer using USB. See USB Communication on page 45.
2
Touch .
112 | Application Deployment
Send Feedback | October 2013 | MN000017A01

Motorola TC55 Specifications

General

Brand	Motorola
Model	TC55
Category	Handhelds
Language	English