• Restore - return the current configuration back to factory defaults.
Importing a Configuration File
Procedure:
1 Copy the configuration file to the root of the microSD card.
2
Touch
.
3
Touch .
4 Touch .
5 Touch Settings.
6 Touch Import.
7 Touch SD Card.
8 Touch Import. The configuration file (datawedge.db) is imported and replaces the current configuration.
Exporting a Configuration File
Procedure:
1
Touch
.
2
Touch .
3 Touch .
4 Touch Settings.
5 Touch Export.
6 Touch SD Card.
7 Touch Export. The configuration file (datawedge.db) is saved to the root of the microSD card.
Importing a Profile File
Note: Do not change the filename of the of the profile file. If the filename is changed, the file will not be
imported.
Procedure:
1 Copy the profile file to the root of the microSD card.
2
Touch .
3
Touch .
4 Touch .
5 Touch Settings.
6 Touch Import Profile.
7 Touch the profile file to import.
8 Touch Import. The profile file (dwprofile_x.db, where x = the name of the profile) is imported and appears
in the profile list.
Exporting a Profile
Procedure:
1
Touch .
DataWedge Configuration | 73
MN000017A01 | October 2013 | Send Feedback