Manual File Configuration
Groups File
A Groups file is a text file that provides a list of groups and assigns users to each group.
The text file contains one line for each group. Each line is formatted as follows:
<groupname>:<user1>,<user2>,...<usern>
where:
<groupname> = the name for a group. This is also the name of the White List file for this group. This field uses any
alphanumeric character.
<user1> through <userN> = the name of the user assigned to this group. The user name is the same as that defined
for the MultiUser feature. See MultiUser Administrator on page 83 for more information.
Note:
If the same user is assigned to multiple groups, then that user’s White List will be a logical union of the
White Lists for all of the groups that user is assigned.
A line starting with the # character is considered a comment and is ignored.
Examples:
•
AdminGroup:alpha
- The Group name is AdminGroup and assigns user alpha to the group.
•
ManagersGroup:beta,gamma
- The Group name is ManagerGroup and assigns users beta and gamma to the group.
White List File
A White List file is a text file that provides a list of allowed packages from that group. The text file contains one line
for each allowed package for that user group. Each line is format as follows:
<package1name>
.
.
.
<packageNname>
where:
<package1Name> = the package name allowed for this group. Wild cards are allowed for this field.
Example:
Refer to the example of the Groups file above. A White List file of the name AdminGroup could have the following
lines:
com.companyname.application
com.motorolasolutions.*
where:
com.companyname.application = the specific application with the package name
com.companyname.application will be permitted for this group.
88 | Administrator Utilities
Send Feedback | October 2013 | MN000017A01
To Next Page
Loading...
Need help?
General