Figure 43: Advanced Data Formatting Screen
5 Touch the Enable checkbox to enable ADF.
Creating a Rule
Note: By default, Rule0, is the only rule in the Rules list.
Procedure:
1 Touch the .
2 Touch New rule.
3 Touch the Enter rule name text box.
4 In the text box, enter a name for the new rule.
5 Touch Done.
6 Touch OK.
Defining a Rule
Procedure:
1 Touch the newly created rule in the Rules list.
DataWedge Configuration | 65
MN000017A01 | October 2013 | Send Feedback
To Next Page
Loading...
Need help?
General