Installing a Key
Procedure:
1
Touch
.
2
Touch .
3 Touch Install Key.
4 Touch Manual.
5 Touch OK.
Figure 59: Enter Key Dialog Box
6 In the Enter key text box, enter the key name followed by the key value obtained in step 1, using the following
format:
<Key Name> <Key value in Hex String>
Example: key2 1234567890abcdef1234567890abcdef1234567890abcdef1234567890abcdef
The key value must be a 64 hexadecimal character string.
7 Touch OK. The key is imported into the device. The message successfully installed the key appears on the
screen.
Viewing Key List
Procedure:
1 Touch Key List.
Figure 60: List of Keys
2 Touch OK.
Deleting a Key
Procedure:
1 Touch Revoke Key.
2 Touch the key to deleted.
3 Touch OK.
90 | Administrator Utilities
Send Feedback | October 2013 | MN000017A01
To Next Page
Loading...
Need help?
General