Specify the destination, and press <Start>.
5
For details on specifying the destination, refer to “• Specifying Destinations”. (See page 5-2.)
If you loaded the document in the ADF, this concludes the procedure.•
If you loaded the document on the document glass, load the next document, and press •
[Next Doc]. Press [Tx Start] to start transmission.
Real time transmission is not possible using the document glass. Even if real time
transmission is set, the machine will automatically switch to memory transmission.
Canceling / Checking Faxes
You can cancel fax transmissions and check currently reserved transmissions. You can
also check the communication result of the latest fax jobs.
If there is a reserved fax, <Job Confirm.
Fax Cancel> illuminates.
<Illuminated>
Canceling / Checking the Current Document
You can cancel or check the current document. On the Review Jobs screen the following
statuses are displayed for each destination.
Reserved Displayed for a destination that has not yet started transmission.
Under execution Displayed for the destination currently being transmitted to.
Completed Displayed for a destination that has finished transmission.
Deleting
Displayed after deleting a destination until the actual deletion process is
complete.
Redial Displayed for a destination that is waiting for redialing.
Press <Job Confirm.
1
Fax Cancel>.
The information for the current document is displayed.
To Next Page
Loading...
Need help?
General
