Muratec MFX-2590 - Basic Scan Settings; Setting the Document Type

1
Basic Scan Functions
Basic Scan Settings 1-19
Basic Scan Settings
Select the document type, contrast, and resolution, etc. according to the document and its
text.
Note
You can also change the default settings, as necessary. (See page 7-34.)
Setting the Document Type
Set the document type to scan with according to the document.
Text: Select this when you want to scan text.
Auto: Select this when you want to set the document type automatically.
Photo: Select this when you want to scan photos.
Load the document, and press <Scan>.
1
For details on loading documents, refer to Chapter 1, “Loading Documents” in the User’s
Guide.
Press [Doc. Type].
2
If [Doc. Type] is not displayed, press the [Advanced] tab and then select [Document Type].