Muratec MFX-2590 - Transmitting Scanned Data as Individual Files (Batch Transmission)

1
2
3
4
Advanced Fax Functions
Useful Internet Fax Functions 4-75
Transmitting Scanned Data as Individual Files (Batch Transmission)
By disabling batch transmission, you can transmit a scanned document with each page as
a separate file.
Load the document, and press <Fax>.
1
Press the [Advanced] tab.
2
Press [Batch Transmission].
3
Select [OFF], and press [Enter].
4
If you select [ON], the batch transmission setting is enabled.
Specify the destination, and press <Start>.
5
For details on specifying the destination, refer to “Specifying Destinations”. (See page 5-2.)