1
2
3
4
Advanced Fax Functions
Security Functions 4-49
Press [ID Check Transmission].
3
Select [ON] and press [Enter].
4
Press [OFF] to disable the ID check transmission setting.
Specify the destination, and press <Start>.
5
For details on specifying the destination, refer to “Specifying Destinations”. (See page 5-2.)
Entering the Destination Twice Before Transmission (Confirmation Dial)
When the confirmation dial function is set, a screen requiring you to reenter the
destination will be displayed before starting transmission. Transmission is allowed only
when the first and second numbers match. Entering the destination twice enables you
check whether there has been a mistake when entering the number. For details on setting
the confirmation dial function, refer to Chapter 2, “Confirming the Destination Before
Transmission” in the Administrator’s Guide.
When the destination includes a dialing option like pause (/P), you need to reenter it
exactly as entered previously including the dialing option.
To Next Page
Loading...
Need help?
General
